Xiaomi Redmi Note 4X

The Xiaomi Redmi Note 4X is a mid-range smartphone that was released by Xiaomi, known for its balance of features and cost-effectiveness. It is important to note that in some markets, the device is simply referred to as the Redmi Note 4, though there are key differences in processor types based on regions.

Official Model Numbers and Identification Codes:

  • Model Number: MBE6A5
  • Manufacturer References: The device is often referred to as "Mido" in documentation and firmware files.

Identification Methods:

  1. Settings Menu: Navigate to "Settings" > "About phone," where the model number (MBE6A5) will be listed.
  2. Printed on the Device: The model number is often printed on the back of the device or beneath the removable battery.
  3. IMEI Verification: Use the device's IMEI number at official websites to confirm the model details.

Technical Specifications:

Display:

  • Size: 5.5 inches
  • Type: IPS LCD capacitive touchscreen
  • Resolution: 1080 x 1920 pixels, ~401 ppi density

Cameras:

  • Rear Camera: 13 MP, f/2.0, PDAF (Phase Detection Autofocus), Dual-LED dual-tone flash
  • Front Camera: 5 MP, f/2.0

Processor:

  • CPU: Qualcomm Snapdragon 625
  • GPU: Adreno 506

Battery:

  • Capacity: Non-removable Li-Po 4100 mAh battery
  • Model Identification: BM42 (note: may vary in regions, critical to verify on the battery itself)

Charging:

  • Connector Type: microUSB 2.0, USB On-The-Go

Memory and Storage Configurations:

  • RAM Variants: 3GB or 4GB RAM options
  • Internal Storage: Options of 32GB or 64GB
  • Expandable Storage: microSD, up to 256GB (dedicated slot)

Spare Parts Compatibility:

  • Display Assembly: Ensure to match both size and connector type which is specific to this model.
  • Battery Replacement: Confirm compatibility with the BM42 specification for accurate sizing and voltage.
  • Charging Port: microUSB 2.0 as specified, ensuring spare parts adhere to this interface.
  • Camera Modules: When replacing, ensure the megapixel (13 MP and 5 MP) and aperture specifications match.

This technical validation should assist in ensuring all components used in the repair or replacement of parts in the Xiaomi Redmi Note 4X are consistent with original manufacturer specifications. This ensures optimum device functionality post-repair.

Screens Redmi Note 4X

3 items↑ Types

Batteries Redmi Note 4X

1 item↑ Types

Flex cables & connectors Redmi Note 4X

1 item↑ Types

Everything for your Redmi Note 4X